Mehr als nur Thermistorhalterungen: R&S NTS und die Zukunft der Rückverfolgbarkeit von HF-Leistung
Every reading on an RF power meter rests on a chain of calibrations that leads back to a national standard. For decades, a key link in that chain has been the thermistor mount, and those parts are running out. Rohde & Schwarz has introduced the R&S NTS family of thermoelectric RF power transfer standards as a replacement. This article explains the announcement, how RF power traceability works, why thermistor mounts are being retired, and what all of this means when you buy power meters and sensors new or pre-owned.
Was Rohde & Schwarz bekannt gegeben hat
On October 13, 2026, Rohde & Schwarz presented the R&S NTS thermoelectric RF power transfer standards. In summary:
- A purely passive, analog design that can serve as a primary standard in microcalorimeters and as a transfer standard for national metrology institutes (NMIs), accredited calibration laboratories and demanding industrial users.
- Positioned as a direct replacement for thermistor mounts, for which new parts are no longer made and which offer no coverage of newer bands such as D-band.
- Sized to fit existing microcalorimeter setups, and designed to connect directly to commercially available, traceably calibrated DC nanovoltmeters.
- A detector chip built for RF-DC substitution, drawing on R&S experience with its NRP power sensors, with two symmetrical RF and DC heaters.
- Maximum input power of +20 dBm, a 4-wire DC heater connection and an integrated temperature sensor.
- At launch: several coaxial models from DC to 67 GHz and a WR 6.5 waveguide model up to 170 GHz, plus open, short and mismatched variants for determining microcalorimeter correction factors.
How RF power traceability works
From national standard to your bench
Traceability is a documented chain of comparisons, each with a stated uncertainty:
- A national metrology institute realizes the unit of RF power with a primary standard, typically in a microcalorimeter.
- Transfer standards carry that value to accredited calibration laboratories.
- Those laboratories calibrate working standards and reference sensors.
- Working standards calibrate the power sensors used in labs and on production lines.
Each step adds a little uncertainty. The calibration certificate for your sensor is the visible end of that chain.
RF-DC substitution in one paragraph
DC power can be measured very accurately with voltage and resistance standards. RF power cannot be measured as directly. RF-DC substitution solves this by heating the same sensing element first with RF and then with DC, and adjusting the DC until the temperature effect is the same. The known DC power then stands in for the unknown RF power. The more symmetrical the RF and DC heating paths, the smaller the correction, which is why R&S emphasizes its matched heaters.
Why thermistor mounts are being retired
Thermistor mounts worked well for decades, but R&S notes that development and manufacture of new parts ended years ago. Labs cannot easily replace a damaged standard, and there is no path to newer frequency bands. A modern replacement that fits existing microcalorimeters lets institutes keep their methods while renewing the hardware.
Thermistor mounts vs. thermoelectric standards vs. everyday sensors
| Thermistor mount (legacy) | R&S NTS transfer standard | Everyday thermal sensors (e.g. R&S NRP40T, Keysight N8487A) | Diode sensors | |
|---|---|---|---|---|
| Role | Primary or transfer standard | Primary or transfer standard | Working measurement | Working measurement, fast or wide dynamic range |
| Typical user | NMIs, top-tier cal labs | NMIs, accredited cal labs, industrial metrology | R&D and production labs | R&D, production, field |
| Abgedeckter Frequenzbereich | Limited to existing models | Coaxial DC to 67 GHz; waveguide to 170 GHz | See each sensor’s datasheet | See each sensor’s datasheet |
| Availability | New parts no longer made | New from R&S | New and pre-owned | New and pre-owned |
What it means for buyers of new and pre-owned power meters and sensors
The calibration certificate matters more than the brand
Most labs will never handle a transfer standard. What they need is a sensor with a trustworthy certificate. When you review one, look for the calibration date, the laboratory and its accreditation (for example ISO/IEC 17025), a statement of traceability, measured data at the frequencies you use, and the measurement uncertainty. A certificate without measured data tells you much less.
Sensors and meters available from TXRX
Thermal and thermocouple sensors are the usual choice for the most accurate average-power work. Options in our range include the R&S NRP series power sensors, the R&S NRP40T und NRP50T thermal power sensors, the Keysight N8487A thermocouple sensor, the Keysight W8486A waveguide sensor and the R&S NRX60 power measurement instrument.

Rohde & Schwarz NRP series: representative image from the product page.
Used power sensor checklist
- Inspect the RF connector and check its type and gender; precision connectors wear and can damage your test ports.
- Ask whether the sensor has ever been overdriven beyond its maximum input power, and check its zero and a reference reading.
- Get the calibration certificate and its measured data.
- Confirm the sensor works with your meter or host software, and that firmware is current.
- For waveguide sensors, check the flange face for damage.
Häufig gestellte Fragen
What is RF power traceability?
It is an unbroken, documented chain of calibrations linking your power sensor’s readings to a national standard, with the uncertainty stated at each step.
Why are thermistor mounts being replaced?
According to Rohde & Schwarz, new thermistor parts have not been made for years, so replacements are unavailable, and there are no models for newer bands such as D-band.
Do I need a transfer standard in my lab?
Most labs do not. Unless you run a calibration laboratory, you need sensors with valid, traceable calibration certificates rather than your own transfer standard.
How often should a used power sensor be calibrated?
Follow the manufacturer’s recommendation and your own quality system. The right interval depends on how heavily the sensor is used and how critical the measurements are.
Bottom line
R&S NTS addresses a quiet but real problem at the top of the calibration pyramid. For most labs, the practical lesson is simpler: buy sensors with good certificates and treat their connectors with care. Browse our power meters and power sensors, calibration accessories und signal generators, oder besuchen Sie unsere instrument repair services.
Quelle: Rohde & Schwarz, “Rohde & Schwarz presents unique R&S NTS transfer standards for RF power traceability applications up to 170 GHz”, October 13, 2026. Original announcement: https://www.rohde-schwarz.com/us/about-us/news-press/all-news/rohde-schwarz-presents-unique-rs-nts-transfer-standards-for-rf-power-traceability-applications-up-to-170-ghz_229356-1653120.html.
This article is an independent summary and commentary by TXRX. Quoted passages are attributed to Rohde & Schwarz. All trademarks belong to their respective owners. TXRX is an independent supplier of new and pre-owned test equipment and is not affiliated with, endorsed by, or an authorized distributor of Rohde & Schwarz.
Über TXRX — TXRX supplies new and pre-owned RF, microwave, optical and high-speed test instruments to labs and manufacturers worldwide. TXRX pre-owned equipment comes with a 6-month warranty; new equipment carries the manufacturer’s standard warranty. Learn more about TXRX · Contact us for a quote
Drafted with AI assistance and reviewed by the TXRX team.